The 3 cabin’s bareboat sailing yacht Oceanis Clipper 393 was built in 2002 and it is docked in Athens, Greece. The Oceanis Clipper 393 (2002) can accommodate up to 6 people in 3 cabins and it has 2 toilets. The overall length of the boat is 39 ft / 12,0 m. The main equipment (find the complete list on the ’Equipments’ tab): air condition, bow thruster, dinghy with outboard engine, GPS chart plotter - cockpit, cockpit table, inverter, autopilot and it’s obligatory extras: final cleaning. The main sail is full batten. You can check-in from 17:00 h and check-out until 09:00 h.
Why charter this Oceanis Clipper 393
3 cabins for 6 berths means about 2 guests per cabin, so bag storage and sleeping turns are clear before departure. 3 guests per head matters on early marina mornings, when showers, breakfast and casting off compete for time. At 12 m, this sailing yacht works best when swim stops still leave time for the evening berth.
Best charter fit
Oceanis Clipper 393 suits crews comparing cabin separation, luggage storage and bathroom timing across 3 cabins and 2 heads. Sailing crews should keep one fallback leg for wind shifts, late sea state and the final marina return.
The Saronic Gulf from the Athens marinas
The big Athens marinas at Alimos and Lavrio put the Saronic on the doorstep, Aegina, Poros and Hydra all inside thirty miles, and Epidaurus with its ancient theatre across the gulf. How far day one goes depends on the handover: an early one makes Aegina or Agistri, a later one is better spent close to base for a morning start. Athens International Airport (ATH) is a 20–45-minute road transfer from the marinas. Aegina, Poros, Hydra and Epidaurus link in day sails of around twenty miles, none of them a long passage. The meltemi is lightest in the mornings, so make the crossings early and keep the run back short.
